MOLD DESIGN · TOOLING · PLASTIC INJECTION MOLDINGInquiry list [email protected]+86 176 2030 0785

AI application illustration

Slide-Cover Ultrasonic Diffuser Housing

Plan a custom slide-cover diffuser housing around rail clearance, stop engagement and vent alignment. Send the shell and cover CAD for review.

Get a Quote ↗
Design concept showing a squared oval slate ultrasonic aroma diffuser with split horizontal upper lid and visible transverse slider track seam, the lid only slightly shifted but attached, bright writing desk
AI application illustration
Top cap and upper enclosure seam in the design concept
Top cap and upper enclosure seam. Exterior design study.

Define the full slide path

Set insertion direction, opening travel and how the cover stops in the closed position. Check clearance where the rails meet the cover and include the shell and cover in the first fit review.

Keep the openings aligned

Identify which openings connect to internal airflow or mist ducts and which are cosmetic. Define the installed cover position before finalising those interfaces in the plastic mould.

Technical reference · Protolabs injection molding design guide

Prepare your quote request

  • Cover and shell CAD in both open and closed positions.
  • Rail datum, allowable free play and stop geometry.
  • Opening locations and the duct or component below each one.
Get a Quote ↗

Buyer questions

Can the slide be reviewed from the cover alone?

Share the mating rails and stop surfaces as well. They determine travel, fit and assembly order.

Should a slide lock be included before DFM?

Define how the cover stays closed and how it is released. Compare snap geometry, material flex and tool release during the review.

Ultrasonic Aroma Diffuser Housings →

Ask about your project ↗