MOLD DESIGN · TOOLING · PLASTIC INJECTION MOLDINGInquiry list [email protected]+86 176 2030 0785

Aroma Diffuser Reservoirs & Lids

Specify the molded liquid reservoir, nesting lid and rim interface with the working fluid, fill line and closure geometry in view.

Design concept showing a complete low dark blue desktop diffuser with two distinct side-by-side integrated refill windows, asymmetrical ellipse body and central mist crown, light gray console
AI application illustration

Start with the fluid-contact map

Identify the fluid formulation, expected exposure, working temperature and contact surfaces. Use these inputs to narrow the resin options for the specified part and use conditions.

Set the rim and lid interfaces

Draw the fill line, seating rim and lid overlap. Include any seal groove and mating component that form part of the intended design so the interfaces can be reviewed together.

Review handling on matched parts

Check how the lid opens, locates and seats on the reservoir. Mark the surfaces and dimensional references that matter to the intended closure and assembly sequence.

Application reference

MUJI · Water tank, fill access and removable cover

Frequently asked questions

Can the upper cover and reservoir be quoted separately?

Yes. List the parts and tooling scope separately, then provide the mating drawings for review of their shared seating and closure surfaces.

Does the same reservoir resin suit every formulation?

Choose a candidate using the stated formulation, contact time and operating conditions. Ask for grade-specific evidence for the intended use.

Aroma Diffuser Mist Outlet Covers & Inserts → · Aroma Diffuser Housing RFQ Checklist →

Aroma Equipment Plastics

Discuss your drawing with OPINOX.

Reservoir and lid CAD with seating surfaces and fill line marked

Discuss your project ↗
Ask about your project ↗